It is understood that due to the high position of the crystal chandelier, and the cleaning process is more troublesome, the following describes several commonly used crystal lamp cleaning methods for your reference.
Manual cleaning of crystal lamps
The bright and beautiful appearance of the crystal lamp, if it is dirty, not only affects the beauty of the crystal lamp itself, but also reduces the refractive index of the crystal lamp. When cleaning crystal lamps:
1. Select a professional crystal lamp cleaner and spray it on the crystal lamp. The cleaning agent will be volatilized together with dust and stains, and then air-dried before installation.
2. It is best to remove one crystal and dip it into a container containing kerosene. Use a toothbrush to gently wipe the crystal appearance. After the dust of the appearance is slowly softened, wash the crystal block with detergent powder. In addition, according to the quality of the detailed crystal lamps, different treatments should be treated differently, and soft cotton cloth should be selected for wiping; when disassembling the crystal pendants, the principle of symmetry should be followed to keep the lamps balanced and the brackets not deformed; do not use when wiping the gold-plated metal brackets. Alcohol, in order to avoid damage to the plating film, affecting the beauty, in order to spare fingerprints on the crystal lamps, wear white cotton gloves when cleaning the crystal lamps.
3. Ask the professional to clean the crystal lamp, which is safe and convenient.
If you want to remove all the bead strings, the large lamps should pay attention to the balance of the lamp body when the bead string is removed. Do not remove the other side and then remove the other side to cause the lamp body to tilt, resulting in deformation of the lamp body or the outer frame; Disassembled. Wipe the bracket assembly to avoid letting the liquid touch the crystal light. When wiping the brackets and accessories, do not touch the soft cloth with water, especially alcohol, so as not to damage the protective film outside the plating layer and affect the surface gloss effect of the lamp holder. Avoid too much effort when installing. The bulb should also be removed and wiped clean before being installed; the bulb should be moderate when it is screwed in. Too loose will cause poor contact, too tight may ruin the bulb. Replace parts at the right time. It is found that the beaded connection buckle is rusty and discolored. It is not beautiful, and the second is easy to be brittle. It is best to change it by the way; if the bead string is found to be missing, it should be filled in time.
have to be aware of is:
1. Cleaning should not be washed with corrosive liquid such as detergent to avoid damage to the plating film.
2. Cleaning can not be used to clean the sharp equipment to avoid scratching.
Although the crystal lamp itself has a glamorous appearance, if we do not pay attention to the cleaning of the crystal lamp in our usual life, it may make the crystal lamp lose its original charm. How to clean the crystal lamp? What to clean? Xiaobian with such questions to help everyone find the answer ~~
Common crystal lamp cleaner
To clean the crystal lamp, first of all, to understand the cleaning agent for cleaning the crystal lamp, there are several kinds of crystal lamp cleaners that we use in our daily life:
Special cleaning agent
This kind of cleaning agent is a kind of cleaning agent specially used for crystal lamp cleaning. It only needs you to spray the cleaning agent on the crystal lamp. You don't need to use the cloth to wipe it. The dust on the crystal ball will follow the cleaning agent. It is very easy to take away when it is volatilized.
kerosene
Kerosene is a good cleaning agent for cleaning the surface of the crystal. We carefully remove the crystal lamp, then put it into the kerosene, then gently brush the crystal surface with a toothbrush, wash it and wash it with detergent. It is.
Crystal lamp cleaning method
Due to the special nature of the crystal lamp material, we must pay attention to several methods and techniques when cleaning the crystal lamp:
1. When cleaning the crystal lamp, we must pay attention to the cleaning safety. That is to say, when cleaning the crystal lamp, especially when wiping the lamp holder, we must remember to cut off the power and remove the bulb, wait until the lamp holder Wipe clean and install it.
2. When cleaning the crystal lamp, keep the balance of the lamp body, which means that if we need to remove the bead string during cleaning, we can't remove the crystal from one side, but we should remove it evenly from both sides. Inconsistent weight causes the lamp body to tilt, reducing the chance of crystal damage.
3. When we wipe the bracket fittings of the crystal lamp, we must notice that the soft cloth used to wipe the bracket can not be stained with water or alcohol, so as not to damage the protective film outside the plating layer of the bracket, resulting in the surface tarnishing.
4. When cleaning the crystal lamp, if it is found that the connection buckle between the beads is discolored or rusted, we can replace it by the way to ensure the beauty of the crystal lamp.
A Battery Charger supplies current to the base plate. Once the AGV is in charging position and the collector has made contact with the base plate, the AGV computer turns on the current.
The base plate has chamfered entry/exit ramps to facilitate smooth drive-on/drive-off of the spring loaded collector.
A battery charging contact consists of a base plate, which is installed on the floor or laterally at a bracket adjacent of the AGV runway, and a current collector which is installed on the vehicle.
Battery charging stations may be installed anywhere within the system where the production process allows the AGV to stop (staging areas, turn arounds, loading stops etc.).
Single Phase Charging Contacts
Single Phase Battery Charging Contacts,60A Battery Charging Contacts,100A Battery Charging Contacts,Single Phase Charging Contacts
Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , https://www.chargers.be