Application
- Adopting Eng. thread quick connector(copper flare connection) or brass tube welding fitting structure, flexibly setting, easy to use and no special need for mounting and fixing.
- Plugging or wiring connection designed to customers' choice.
- SPST connection, normal open or normal close structure to customers' choice.
- Security and reliability by adopting fusion welding stainless steel industor and full air-tight connection.
- Any pressure value within 3~667PSI(0.02Mpa~4.6Mpa) can be made base on customers' requipment.
- Pre-set pressure parameter before delivery allows direct use without resetting on the customers'site.
Operation/Working Principles
When the medium (liquid or gas) pressure within the pressure system is above or below the rated security pressure, the dish metal diaphragm within the system jumps instantaneously, thus to push the switch contact to be connected or disconnected through a connecting rod; When the pressure drops to the rated recovery value, the dish metal diaphragm is instantaneously reset and the switch is automatically reset.
Specialist
With screw quick coupling or copper tube welded structure, it is flexibly installed and easily used with no special installation and fixing mode.
Insert and wire-type electrical connectors can be selected by users.
Unipolar single-throw or unipolar double-throw, normally open or normally closed switch contact structure optional for users, sealed stainless steel sensor safe and reliable.
It can be manufactured according to any pressure value selected by users within the pressure range of 3-667PSI (0.02-4.6Mpa).
Fitting structure: Copper tube welding, Copper flare fitting
Connection: Terminal and wiring.
Feature:
- Measurement range: -0.1~0~0.01~100MPa
- Full stainless steel structure
- Multiple pressure ports
- CE,UL,VDE,CQC,TUV,ROHS
- Protection level: IP65 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
- One group switch quantity output control
- Intrinsic safety explosion-proof type
- Conform to the state explosion protection standards
Â
Performance Specification:
|
NO. |
Name | Features/setting value |
| 1 | Setting range of pressure range | 3-667PSI/0.02-4.6mpa |
| 2 | Tolerance range of pressure switch | 1.45-14.5PSI/0.01-0.1mpa |
| 3 | Contact form | Normal open, close |
| 4 | Contact capacity | AC240V,3A,AC120V,6A |
| 5 | Contact resistance | ≤ 50 MΩ |
| 6 | Insulation resistance | ≥100 MΩ(between terminal and housing) |
| 7 | Dielectric strength | No breakdown and flashing in 1min at AC1500V |
| 8 | Maximum burst pressure | No burst phenomenon in 1min at ≤5000PSI(34.5MPA) blast pressure |
| 9 | Gas tightness | No leakage (4.8mpa/1min) |
| 10 | Adaptive temperature | -30-80 degree |
| 11 | Life cycle | ≥100000 times |
| 12 | Over pressure Test | Increase to 10mpa.No burst and leakage in 10mins |
We can supply the following Household Air-conditioner pressure switch:
Remark:Â
1. All the copper length and thickness can be customized by your need.
Â
2. In order not to waste your time, we adviced if you are interested in  our products, please provide the following information, then we can find what you want correctly:
Â
a. The range of pressure (3-667PSI/0.02-4.6Mpa,Normal open or Norm close)
Â
b. The connection way: insert or wire-type,the length of the wire.Â
Â
c. The thread: internal thread or external thread (1/8 NPT).
3.Packing and shipping:
  Cargo is packed in standard cartons and suitable for tranportation by professional packing staff. And shiped by sea, by air or by express like DHL ,Fedex, TNT, UPS ect. Â
Application
- Adopting Eng. thread quick connector(copper flare connection) or brass tube welding fitting structure, flexibly setting, easy to use and no special need for mounting and fixing.
- Plugging or wiring connection designed to customers' choice.
- SPST connection, normal open or normal close structure to customers' choice.
- Security and reliability by adopting fusion welding stainless steel industor and full air-tight connection.
- Any pressure value within 3~667PSI(0.02Mpa~4.6Mpa) can be made base on customers' requipment.
- Pre-set pressure parameter before delivery allows direct use without resetting on the customers'site.
Operation/Working Principles
When the medium (liquid or gas) pressure within the pressure system is above or below the rated security pressure, the dish metal diaphragm within the system jumps instantaneously, thus to push the switch contact to be connected or disconnected through a connecting rod; When the pressure drops to the rated recovery value, the dish metal diaphragm is instantaneously reset and the switch is automatically reset.
Specialist
With screw quick coupling or copper tube welded structure, it is flexibly installed and easily used with no special installation and fixing mode.
Insert and wire-type electrical connectors can be selected by users.
Unipolar single-throw or unipolar double-throw, normally open or normally closed switch contact structure optional for users, sealed stainless steel sensor safe and reliable.
It can be manufactured according to any pressure value selected by users within the pressure range of 3-667PSI (0.02-4.6Mpa).
Fitting structure: Copper tube welding, Copper flare fitting
Connection: Terminal and wiring.
Feature:
- Measurement range: -0.1~0~0.01~100MPa
- Full stainless steel structure
- Multiple pressure ports
- CE,UL,VDE,CQC,TUV,ROHS
- Protection level: IP65 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
- One group switch quantity output control
- Intrinsic safety explosion-proof type
- Conform to the state explosion protection standards
Â
Performance Specification:
|
NO. |
Name | Features/setting value |
| 1 | Setting range of pressure range | 3-667PSI/0.02-4.6mpa |
| 2 | Tolerance range of pressure switch | 1.45-14.5PSI/0.01-0.1mpa |
| 3 | Contact form | Normal open, close |
| 4 | Contact capacity | AC240V,3A,AC120V,6A |
| 5 | Contact resistance | ≤ 50 MΩ |
| 6 | Insulation resistance | ≥100 MΩ(between terminal and housing) |
| 7 | Dielectric strength | No breakdown and flashing in 1min at AC1500V |
| 8 | Maximum burst pressure | No burst phenomenon in 1min at ≤5000PSI(34.5MPA) blast pressure |
| 9 | Gas tightness | No leakage (4.8mpa/1min) |
| 10 | Adaptive temperature | -30-80 degree |
| 11 | Life cycle | ≥100000 times |
| 12 | Over pressure Test | Increase to 10mpa.No burst and leakage in 10mins |
We can supply the following Household Air-conditioner pressure switch:
Remark:Â
1. All the copper length and thickness can be customized by your need.
Â
2. In order not to waste your time, we adviced if you are interested in  our products, please provide the following information, then we can find what you want correctly:
Â
a. The range of pressure (3-667PSI/0.02-4.6Mpa,Normal open or Norm close)
Â
b. The connection way: insert or wire-type,the length of the wire.Â
Â
c. The thread: internal thread or external thread (1/8 NPT).
3.Packing and shipping:
  Cargo is packed in standard cartons and suitable for tranportation by professional packing staff. And shiped by sea, by air or by express like DHL ,Fedex, TNT, UPS ect. Â
T5 Electronic Wall Lamp (FT4041),T5 Electronic Wall Lamp (FT4040),T5 Electronic Wall Lamp (FT2005)
LED Bulbs & Tubes Co., Ltd. , http://www.nsledlight.com