1, familiar with and master a variety of electrical distribution room and wiring equipment performance, can accurately operate a variety of indoor electrical equipment distribution. Familiar with the positions of various safety procedures.
2. Seriously monitor the work during working hours, record all the data on time, including electricity, voltage, transformer humidity, room temperature, etc., and keep abreast of the current changes of the main circuit, so that all equipment is in normal, economic and safe operation. In order to achieve the purpose of proper maintenance and safe operation.
3. Handle all faults that can be solved without special means or power outages in a timely manner. Record the faults that cannot be handled in time, and report the relevant personnel.
4. When patrolling high-voltage equipment, no other work shall be carried out, and no movement or crossing of the barrier shall be allowed.
5, thunderstorm weather, need to inspect outdoor high-voltage equipment, should wear protective boots and other protective equipment, not close to lightning rods and arresters.
6. When the high-voltage equipment is short-circuited to the ground, it shall not enter the fault point within 4 meters indoors, and shall not enter the area within 8 meters of the fault point outside. Personnel who need to enter the above range must wear protective equipment and wear insulated gloves when touching the outer casing and frame of the equipment.
7. Inspect the power distribution unit and lock the door after entering the high pressure room.
8. In the event of severe weather such as strong winds, dense fog, storms, fog, etc., special inspections of equipment should be carried out according to specific conditions, timely understanding of outdoor electrical equipment, and completion of emergency tasks for the deployment of relevant personnel. In the event of an emergency that seriously threatens the equipment or personal safety, the duty officer can first open the power switch of the relevant equipment without prior permission from the superior, and immediately report it to the relevant department. Special inspections should be performed when a major failure occurs in the equipment.
9. Keep the workplace clean and tidy, and create good conditions for the safe operation of electrical equipment.
Low Rate Nicd Battery KPL Series
Established in 1956, during the China first five-year-plan, Henan Xintaihang Power Source Co., Ltd. (Factory No.755) was the first R&D and manufacturing enterprise in China in the field of alkaline storage batteries and modular power system and it was also the military factory which owned the most varieties rechargeable batteries in domestic. Taihang was located in national Chemistry and Physicals Power Source Industrial Park, Xinxiang City, Henan, China.
Low Dishcharge Rate Nickel Cadmium Battery, KPL10~KPL1200, Max. discharge current ＜0.5C.
The nickel–cadmium battery (NiCd battery or NiCad battery) is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes. The abbreviation NiCd is derived from the chemical symbols of nickel (Ni) and cadmium (Cd).
Ni Cd Battery,110V Kpl 300Ah Battery,Kpl1000Ah Nicd Battery,Low Rate Nicd Battery Kpl Series
Henan Xintaihang Power Source Co.,Ltd , https://www.taihangbattery.com