LED explosion-proof light installation method

LED explosion-proof lamp is a kind of explosion-proof lamp. Its principle is the same as that of explosion-proof lamp, except that the light source is LED light source. It refers to various specifics adopted to prevent the ignition of surrounding explosive mixtures such as explosive gas environment, explosive dust environment, gas gas, etc. Measure lamps. LED explosion-proof light is currently the most energy-saving explosion-proof lighting, the application market is relatively broad. There are also various types of LED explosion-proof lights, and the installation method is different. Explosion-proof led lamp installation method?

1. Ceiling type: This method requires punching and tapping the top of the installation, and bolting the explosion-proof chandelier to the top.

2. Wall-mounting: Mount the lamp body on the wall or other supporting pieces through the bracket, then pass the cable through the connector, gasket, and seal ring in turn to the terminal box. Finally, tighten the connector and tighten the set screw.

3, bracket type: generally instead of wall mounted, with bracket. Benefits: can adjust the angle up and down, such as some led explosion-proof floodlights are basically used bracket type. This method is easy to install, with a bracket, and then fix an expansion screw on the wall.

4, pole type: including guardrail pole type, flange pole type. It is generally used on the roads, such as chemical plants and roads on the side of gas stations.

5, boom type: the joint through the cable, screw into the steel pipe, tighten the set screw, and then pass the cable through the gasket. The seal ring tightens the lamp body and connector in the terminal box and tightens the set screw.