The fibers,250um,are positioned in a loose tube made of a high modulue plastic.The tubes ate filled wth a water-resistant filling compound,A steel wire located in the center of core as a metallic strength member into a compact and circular cable core .An Aluminium Polyethylene Laminate (APL) is applied around the cable core .which is filled with the filling compound to protect it fron water ingress.Then the cable core is covered with a PE outer sheath.After the single steel armored,the cable is finally completed with an outer sheath.Â
Product Construction:
Fiber:
24-288 fibers
Multi-loose tube gel-filled
Central Strength Member:
Fiberglass reinforced Platic (FRP) or steel wire.
Strength Member:
Aluminum Tape Armor
Steel Wire
Outer Jacket:
Black UV polyethylene (PE).
Features:
- Up to 288 fibers.
- Loose tube gel-filled construction for superior fiber protection.
- Aluminum tape armor to protect cable from mechanical damage.
- UV and waterproof design.
- Interbuilding voice or data communication backbone.
- Installed in duct, underground conduit .
Optical Characteristics:
Fiber Type |
G.652 |
G.655 |
50/125^m |
62.5/125^m |
|
|
Attenuation (+20X) |
850 nm |
 |
 |
<3.0 dB/km |
<3.3 dB/km |
1300 nm |
 |
 |
<1.0 dB/km |
<1.0 dB/km |
|
1310 nm |
<0.36 dB/km |
<0.40 dB/km |
 |
 |
|
1550 nm |
<0.22 dB/km |
<0.23 dB/km |
 |
 |
|
Bandwidth |
850 nm |
 |
 |
>500 MHz-km |
>200 Mhz-km |
1300 nm |
 |
 |
>500 MHz-km |
>500 Mhz-km |
|
Numerical Aperture |
 |
 |
0.200±0.015 NA |
0.275±0.015 NA |
|
Cable Cut-off Wavelength cc |
<1260 nm |
<1450 nm |
 |
 |
|
Structure and Technical Specifications
Â
|
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Max Fiber |
Max No. of |
Allowable Tensile Load (N) |
Allowable Crush Resistance |
||
Short Term |
Long Term |
Short Term |
Long Term |
|||||
2~36 |
14.1 |
193 |
6 |
6 |
3000 |
1000 |
3000 |
1000 |
38~72 |
15.1 |
212 |
12 |
6 |
3000 |
1000 |
3000 |
1000 |
74~96 |
16.3 |
246 |
12 |
8 |
3000 |
1000 |
3000 |
1000 |
98~120 |
17.8 |
288 |
12 |
10 |
3000 |
1000 |
3000 |
1000 |
122~144 |
19.4 |
336 |
12 |
12 |
3000 |
1000 |
3000 |
1000 |
>144 |
Available upon customer request |
|||||||
Note : This datasheet can only be a reference, but not a supplement to the contract. Please contact our sales people for more detailed information.
For more detailed information.
We produce and test cable comply with following standard:
Mechanical Performance | |
Max Tension Performance |
IEC 60794-1-2-E |
Max.Operation Tension |
IEC 60794-1-2-E1 |
Crush Test |
IEC 6079 -1-2-E3 |
Impact Test |
IEC 60794-1-2-E4 |
Repeated Bending |
IEC 60794-1-2-E6 |
Torsion Test |
IEC 60794-1-2-E7 |
Cable bend |
IEC 60794-1-2-E11A |
Attenuation Coefficient |
ITU-T G.652 |
Structural Test |
IEC-60793-1-20 |
Environmental Performance | |
Temperature Cycling |
IEC 60794-1-2-F1 |
Water Penetration |
IEC 60794-1-2-F5B |
Filing Compound Flow |
IEC 60794-1-E1 |
Â
Â
Located in Ningbo, the main seaport city in China, Ningbo Haishu Efon Communication Limited is a professional manufacturer of fiber optic cables.We have more than 15 years' experience in producing communication cables and fiber optic cables.Since then we have been growing to become a leading Chinese manufacturer and exporter of fiber optic products around the world.
Quality and Safety
We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers.Besides, all of our products have been strictly inspected before shipment.Our products have passed RoHS, ISO9001 and TLC certifications.
Our Principles
Full customer satisfaction
Commitment to high-quality service
Long-term cooperation and profits for each other
Â
Payment
For large orders, T/T , L/C, and E-credit lines are all offered.
For small orders, credit-cards are accepted.
Â
Shipping &Â Delivery
We will send the products within 10 days.
We ship small batched by air, or large orders by container.
Â
Return and Warranty:
All products have been tested before ship out
All products have 5 years warranty.If there is no man-made problem ,we will replace or repair for you freely.
We own the best after-sale service.If any problems happen ,our team will do our best to solve for customers.
 The fibers,250um,are positioned in a loose tube made of a high modulue plastic.The tubes ate filled wth a water-resistant filling compound,A steel wire located in the center of core as a metallic strength member into a compact and circular cable core .An Aluminium Polyethylene Laminate (APL) is applied around the cable core .which is filled with the filling compound to protect it fron water ingress.Then the cable core is covered with a PE outer sheath.After the single steel armored,the cable is finally completed with an outer sheath.Â
Product Construction:
Fiber:
24-288 fibers
Multi-loose tube gel-filled
Central Strength Member:
Fiberglass reinforced Platic (FRP) or steel wire.
Strength Member:
Aluminum Tape Armor
Steel Wire
Outer Jacket:
Black UV polyethylene (PE).
Features:
- Up to 288 fibers.
- Loose tube gel-filled construction for superior fiber protection.
- Aluminum tape armor to protect cable from mechanical damage.
- UV and waterproof design.
- Interbuilding voice or data communication backbone.
- Installed in duct, underground conduit .
Optical Characteristics:
Fiber Type |
G.652 |
G.655 |
50/125^m |
62.5/125^m |
|
|
Attenuation (+20X) |
850 nm |
 |
 |
<3.0 dB/km |
<3.3 dB/km |
1300 nm |
 |
 |
<1.0 dB/km |
<1.0 dB/km |
|
1310 nm |
<0.36 dB/km |
<0.40 dB/km |
 |
 |
|
1550 nm |
<0.22 dB/km |
<0.23 dB/km |
 |
 |
|
Bandwidth |
850 nm |
 |
 |
>500 MHz-km |
>200 Mhz-km |
1300 nm |
 |
 |
>500 MHz-km |
>500 Mhz-km |
|
Numerical Aperture |
 |
 |
0.200±0.015 NA |
0.275±0.015 NA |
|
Cable Cut-off Wavelength cc |
<1260 nm |
<1450 nm |
 |
 |
|
Structure and Technical Specifications
Â
|
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Max Fiber |
Max No. of |
Allowable Tensile Load (N) |
Allowable Crush Resistance |
||
Short Term |
Long Term |
Short Term |
Long Term |
|||||
2~36 |
14.1 |
193 |
6 |
6 |
3000 |
1000 |
3000 |
1000 |
38~72 |
15.1 |
212 |
12 |
6 |
3000 |
1000 |
3000 |
1000 |
74~96 |
16.3 |
246 |
12 |
8 |
3000 |
1000 |
3000 |
1000 |
98~120 |
17.8 |
288 |
12 |
10 |
3000 |
1000 |
3000 |
1000 |
122~144 |
19.4 |
336 |
12 |
12 |
3000 |
1000 |
3000 |
1000 |
>144 |
Available upon customer request |
|||||||
Note : This datasheet can only be a reference, but not a supplement to the contract. Please contact our sales people for more detailed information.
For more detailed information.
We produce and test cable comply with following standard:
Mechanical Performance | |
Max Tension Performance |
IEC 60794-1-2-E |
Max.Operation Tension |
IEC 60794-1-2-E1 |
Crush Test |
IEC 6079 -1-2-E3 |
Impact Test |
IEC 60794-1-2-E4 |
Repeated Bending |
IEC 60794-1-2-E6 |
Torsion Test |
IEC 60794-1-2-E7 |
Cable bend |
IEC 60794-1-2-E11A |
Attenuation Coefficient |
ITU-T G.652 |
Structural Test |
IEC-60793-1-20 |
Environmental Performance | |
Temperature Cycling |
IEC 60794-1-2-F1 |
Water Penetration |
IEC 60794-1-2-F5B |
Filing Compound Flow |
IEC 60794-1-E1 |
Â
Â
Located in Ningbo, the main seaport city in China, Ningbo Haishu Efon Communication Limited is a professional manufacturer of fiber optic cables.We have more than 15 years' experience in producing communication cables and fiber optic cables.Since then we have been growing to become a leading Chinese manufacturer and exporter of fiber optic products around the world.
Quality and Safety
We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers.Besides, all of our products have been strictly inspected before shipment.Our products have passed RoHS, ISO9001 and TLC certifications.
Our Principles
Full customer satisfaction
Commitment to high-quality service
Long-term cooperation and profits for each other
Â
Payment
For large orders, T/T , L/C, and E-credit lines are all offered.
For small orders, credit-cards are accepted.
Â
Shipping &Â Delivery
We will send the products within 10 days.
We ship small batched by air, or large orders by container.
Â
Return and Warranty:
All products have been tested before ship out
All products have 5 years warranty.If there is no man-made problem ,we will replace or repair for you freely.
We own the best after-sale service.If any problems happen ,our team will do our best to solve for customers.
ZGAR AZ Vape Pods 5.0
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
From production to packaging, the whole system of tracking, efficient and orderly process, achieving daily efficient output. WEIKA pays attention to the details of each process control. The first class dust-free production workshop has passed the GMP food and drug production standard certification, ensuring quality and safety. We choose the products with a traceability system, which can not only effectively track and trace all kinds of data, but also ensure good product quality.
We offer best price, high quality Pods, Pods Touch Screen, Empty Pod System, Pod Vape, Disposable Pod device, E-cigar, Vape Pods to all over the world.
Much Better Vaping Experience!
ZGAR AZ Vape 5.0 Pods,ZGAR AZ Vape Pods 5.0,ZGAR AZ Vape Pods 5.0 Pod System Vape,ZGAR AZ Vape Pods 5.0 Disposable Pod Vape Systems
ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.szvape-pen.com