In order to strengthen the management and monitoring of production sites, public places, key locations, etc., enterprises and governments have built a large-scale video surveillance network, using advanced network monitoring methods to achieve remote management, improve work efficiency, strengthen safety production, and better Maintain public safety order. Network video surveillance can realize remote monitoring and management, but because it is only a one-way point-to-multipoint video transmission, it is powerless for emergency command and coordinated dispatch after an emergency occurs, and emergency command for emergency Scheduling and coordinated work are the most critical places in a monitoring system and the most advanced place in a monitoring system.
Video conferencing, as the only system that realizes multi-party video-to-audio "face-to-face" communication, can provide the best and most complete means of communication. It is widely used in conferences, training, collaborative work and other purposes. It is also the best means of emergency command and dispatch.
Integrate conferences and surveillance, give full play to the video surveillance capabilities of the surveillance system, and at the same time use video conferencing to strengthen the emergency command capabilities of the video surveillance system, by introducing the monitored video into the video conference, and between the video conference and the surveillance system The interconnection and mutual control will provide a state-of-the-art monitoring and emergency command and dispatch method, which can respond to emergencies at the first time, transfer the scene to the relevant departments and personnel at the first time, and conduct various departments at the first time. Collaborative scheduling among organizations, organize a large range of personnel to cooperate in collaborative work.
iFreecomm adopts creative patent technology, based on advanced network video conferencing and network video surveillance technologies and products, it is the first in the industry to launch a new generation of video surveillance and video conference fusion solutions, the world's leading solutions , So that your daily meetings, production scheduling, management and monitoring rose to a new level.
CSCT conference and surveillance converged video communication solution networking diagram:
The CSCT conference and surveillance fusion video communication solution is based on the fusion of video conference terminals and network monitoring front-end equipment. Through innovative technology, the video conferencing system and network monitoring are realized through the intercommunication of media flow and control signaling between the front-end equipment. Interoperability and mutual control of the system. The program has the following characteristics:
Realize the interconnection and mutual control between the video conference terminal and the video surveillance front-end equipment
The monitoring front end receives the control of the video conference terminal and the monitoring system platform at the same time. Under the control of the video conference terminal, the monitoring front end transmits the video signal to the video conference terminal; the monitoring front end is equivalent to the video source of the video conference terminal, and the video conference terminal can choose to monitor The front-end camera signal is input and uploaded to the MCU, broadcast to other video conference terminals for viewing, and the video conference terminal can control the camera of the monitoring front end; the monitoring front end also transmits the collected camera signal to the monitoring platform.
Based on the communication between the monitoring front-end equipment and the video conference terminal, the video conference system and the monitoring system are relatively independent
The intercommunication is only on the terminal side. No modification is needed for the two systems. The two systems are relatively independent while maintaining mutual control. This realizes the organic combination of independent operation of the two systems and good interconnection and mutual control.
Welcome to reprint, this article comes from the electronic enthusiast network (http: //)Antenk extended its connector product range by SD card connectors. As already mentioned there are various applications, in the past driven by the computer industry, which are using memory cards as well in their end products, single sided pressure contact connectors can be designed and manufactured according to a customer specific requirement based on customer dedicated insulator- and contact dies. Such single sided pressure contact connectors are mainly used as board to board connection on the base of direct contact to the pads on the board.
Compact Flash Card Connector Overview
Store More Memories
Compact Flash storage cards are small, removable, mass-storage devices. They electrically comply with Compact Flash Association standards, the PC Card ATA standard, and run in True IDE mode. These 50-position cards typically hold between 32 MB and 2 GB of memory and are about the size of a matchbook. Antenk`s connectors include headers that can accept Type I (3.3mm thick) or Type II (5.0mm thick) storage cards, flush and raised mounting heights, and ejectors. Antenk Compact Flash card connectors also provide electrostatic discharge protection.Adapter for Compact Flash Card type I and II
Available with various ejectors
Different stand offs heights
Reverse type without stand-off height is not applicable to Compact Flash Card Type II
Compact Flash Card Connector Specification
Insulation Resistance: 1000MΩ at 500V DC
Withstanding Voltage: 500Vrms
Current Rating: 1A AC/DC max.
Contact Resistance: 40mΩ max. at 20mV max.
Operating Temp. Range: -55°C to +85°C
Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak
Mating Cycles: 10,000 times
Materials and Finish
Insulator: LCP, glass filled (UL94V-0)
Push Button: Glass reinforced PBT (UL94V-0)
SMT Metal: Brass, pure Sn
Pivot Shell: Stainless Steal
Contacts: Brass
Plating: Contacts - Gold (15µ[) over Nickel (40µ[), Solder Tails - pure Sn
Compact Flash Card Connector Product Features
Compact Flash Connectors
Robust surface-mountable designs
Proven PCMCIA contact technology
Accepts hardware for mechanical mounting
Top- and bottom-mounting styles
Right-angle and vertical orientations
Compact Flash Connectors Applications
Desktop and laptop computers
Digital cameras
Smart phones
Data recorders
Slot machines
Industrial and embedded computers
SD Card Connector,Tf Card Connector,Sd Card Connector,Natural Cf Card Connector,Compact Flash Card Connector,CF cards types I/II,CF Card connector MA type Adapter,CF Card connector MA type Ejector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com